Button
Function
EJECT
Safely removes a USB device
MUTE
Turns off the volume output
Subtitle
Switches a video's subtitles (if applicable)
Audio
Switches a video's audio stream (if applicable)
Setup
Brings up the Setup menu
Alpha-numeric
• Pressing any of these keys once inputs the corresponding number.
keys
• Pressing keys 2-9 multiple times inputs the corresponding alpha
• While listening to a song or music playlist, press and hold any of the
A
B
C
D
User assignable shortcut/function keys. See "Remote Settings" on page
,
,
,
193. Default settings are as follows (only valid when inside the Videos,
Music, or Photos menus):
Pressing
Pressing
Pressing
Pressing
Using a USB Keyboard
As an alternative to using the remote control, you can plug a USB keyboard into
either of the two USB ports on the media player.
Key or key
Function
sequence
Displays the main menu and the various options for playback of files and
HOME
device setup.
+
Suspends the device into sleep mode and turns off video output.
CTRL
P (Power)
Navigate through Home options, menu screens, media libraries, on-screen
UP , DOWN , LEFT ,
keyboards, and toolbars.
& RIGHT ARROWS
• Displays the media directories and Settings screens.
ENTER
• Turns information bar ON or OFF.
• Begins playback of the selected media file.
• Enables the currently selected setting in a Settings option screen.
Discontinues playback.
S (Stop)
Goes back to the previous screen.
ESC (Back)
-
Scans backward during audio/video playback. Supports the following
(Reverse)
speeds: 2×, 4×, 8×, 16×.
characters.
0-9 buttons to create a preset.
activates the
activates the
activates the
activates the
WD TV Live Streaming Media Player
sort and filter menu.
select content source menu.
change view menu.
dashboard menu.
OPERATING THE MEDIA PLAYER – 48
User Manual
Need help?
Do you have a question about the WD TV Live and is the answer not in the manual?
Questions and answers
how do you change password
how do you reset WD TV live unit
To reset the Western Digital WD TV Live unit, you can follow these steps:
1. Factory Reset Using the Reset Button:
- Locate the reset button on the side next to the USB connector.
- With the WDTV powered on, press and hold the reset button for ten seconds.
2. Reset via Device Settings (for WD TV Live SMP Gen 3):
- Go to Setup > System.
- Scroll to and click on Device Reset.
- Select Reset All Online Service Accounts.
- Confirm by selecting Yes.
3. Reset to Fix Reboot Loop Issues:
- Disconnect the WDTV from the internet (unplug the network cable or block Wi-Fi access).
- Perform a factory reset or Reset All Online Service Accounts.
- After reset, avoid enabling the AccuWeather service to prevent reboot loops.
This answer is automatically generated