Network Settings - Western Digital WD TV Live User Manual
Streaming
Hide thumbs
Also See for WD TV Live:
- User manual (236 pages) ,
- Quick install manual (12 pages) ,
- Product specifications (2 pages)
Table of Contents
Advertisement
Network Settings
Use the menus in this category to configure and view the media player's network
settings after initial setup using the setup wizard. See "Network Setup" on page 21
for information and instructions regarding the initial setup wizard.
Press
/
to make a selection from the list of options, then press OK.
Network Setup
Wired
1. Navigate to the Home | Setup menu bar.
2. Press
/
to select Network Settings, then press OK.
3. Press
/
to select Network Setup, then press OK.
4. Select Wired, then press OK.
5. Select a setup configuration option, then press OK.
Select Automatic to have the device attempt to detect your network connection
automatically, then go to step 10.
Select Manual to manually set your network connection. Proceed to step 6.
Important: Manual setup is recommended for advanced users only.
WD TV Live Streaming Media Player
SETUP AND ADVANCED FEATURES – 187
User Manual
- Quick Links:
- Connections
- Wireless Network Setup
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the WD TV Live and is the answer not in the manual?
Questions and answers
how do you change password
how do you reset WD TV live unit
To reset the Western Digital WD TV Live unit, you can follow these steps:
1. Factory Reset Using the Reset Button:
- Locate the reset button on the side next to the USB connector.
- With the WDTV powered on, press and hold the reset button for ten seconds.
2. Reset via Device Settings (for WD TV Live SMP Gen 3):
- Go to Setup > System.
- Scroll to and click on Device Reset.
- Select Reset All Online Service Accounts.
- Confirm by selecting Yes.
3. Reset to Fix Reboot Loop Issues:
- Disconnect the WDTV from the internet (unplug the network cable or block Wi-Fi access).
- Perform a factory reset or Reset All Online Service Accounts.
- After reset, avoid enabling the AccuWeather service to prevent reboot loops.
This answer is automatically generated