19) Pull the ENGINE BOARD carefully to direction
shown to release the DISPLAY connector. Be careful
not to damage the connector.
21) Pull up and remove the CAMERA MODULE.
23) Remove the DISPLAY ADHESIVE with the tweezers.
Do not use it again. Discard it.
15
20) Push down the SS-88 camera removal tool to
release the CAMERA MODULE.
22) Peel off one corner of the DISPLAY ADHESIVE with
the dental tool. Be careful not to injure yourself with
the sharp end of the dental tool.
24) Lift up the DISPLAY with the SS-93 from the
shown place.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia 500 (RM-750)
L1L2 Service Manual
Version 1.0