Installation Best Practices And Procedures - HP 634041-006 Deployment Manual

7 Installation best practices and procedures

This section provides an overview of the best practices and steps required to install a BladeSystem
enclosure with external SAS storage; details are not included in the scope of this document. For
details, see the setup and installation instructions provided with each device. User documents for
devices in this solution are available on the HP Manuals website
manuals and on the device websites:
BladeSystem Technical Resources website:
documentation
P2000 G3 SAS MSA website:
> Manuals)
D2600/D2700 website:
Manuals)
MSA 2040 SAS website:
MDS600 website:
D6000 website:
Tape Storage & Media website:
or Tape Autoloaders)
NOTE: While installing this solution, record device and system information in
(page 101). This information is used in later installation or configuration steps, and will be helpful
for troubleshooting and support purposes.
52 Installation best practices and procedures
(under the Installing tab)
http://www.hp.com/go/P2000
http://www.hp.com/go/D2000
http://www.hp.com/go/msa2040
http://www.hp.com/go/mds600
http://www.hp.com/go/d6000
http://www.hp.com/go/tape
http://www.hp.com/support/
http://www.hp.com/go/bladesystem/
(under HP Support & Drivers
(under Support for your device >
(under Data Sheets / Documents)
(under HP Support & Drivers > Manuals)
(under Business Class Libraries
"Device worksheets"