Foscam FI8620 User Manual page 44

WWW.FOSCAM.COM FI8620 User Manual
Figure 5.5
5.1.5 Can't access IP camera in internet
There are some reasons:
1 ActiveX controller is not installed correctly (Figure2.10-2.12)
2 The port which camera used is blocked by Firewall or Anti-virus software. Please change
another port number and try again. (Figure5.2)
3 Port forwarding is not successful
Check these settings and make sure they are correct.
5.1.6 UPnP always failed
UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port
forwarding automatically because of firewall or anti-virus software. It also has much relation with
router's security settings. So we recommend you do port forwarding manually. You can view
your camera in internet successfully after you do port forwarding manually in your router.
5.1.7 Can't operate the cradle head
If you can't operate the cradle head, such as: click the button , but the cradle head can not
move. Usually, the cradle head can't operate mainly because of wrong settings. Please don't
42
Shenzhen Foscam Intelligent Technology Co., Ltd
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168