Table of Contents
Advertisement
MAIN MENU
RF Modulator Type
If the Mediamaster is connected to the TV with a RF cable, you
must select the right RF modulator alternative, which is depend-
ent on the country where the Mediamaster is being used.
Select "UK (PAL I)" if this is applicable.
Select "Normal (PAL B/G)" for all other country alternatives.
If you get picture but no sound, the RF modulator selection might
be wrong.
Position of the RGB output
Adjust the horizontal position of the TV picture with the
buttons. (The "TV signal," see above, must be set to RGB for this
function to work.)
Time Adjustment
The time is adjusted by using the
time.
You can also adjust the minutes by using the
Receiver Upgrade
In order to keep the Mediamaster up-to-date, it will be possible
to download new versions of the system software via the cable
network. New software may include new or improved features
for existing menus.
IMPORTANT! Updating may take a while. The front display will
indicate the percent left to download.
NEVER turn off the Mediamaster, never use the remote con-
trol or disconnect the network socket cable during the down-
load procedure! This will damage the software and the re-
ceiver may have to be sent in for service!
Reinstall
Use this option only if you have to start the complete installation
procedure from scratch. If you continue from here, all your pre-
vious settings, parental code and favourite channels etc. will be
erased!
If you do not want to change any settings you can leave this
menu when the warning is displayed by pressing BACK or
EXIT.
buttons, 1/2 an hour at a
buttons.
GB 25
Advertisement
Table of Contents
