Table of Contents
Advertisement
VIEWING MODE
General Information
The following describes the basic functions of your Mediamaster
while watching TV or listening to radio channels from the cable
network.
The functions described here can only be used if they are in-
cluded in the transmitted programme information.
If you select a programme to which you do not have access, you
will get a message on the screen.
While viewing, the current channel number will be shown on the
front panel display.
However, when you have changed into Radio mode (to listen to ra-
dio channels) the number will be preceded by the capital letter A;
and e.g. A123 will be shown in the display.
It is possible for the service provider to transmit other services
than TV channels only. For example it is possible to transmit
games via the cable net. In such a case the display will show the
capital letter O before the figures, and e.g. O456 will be shown.
In addition to the normal functions like switching the Media-
master in/out of stand-by, changing the volume etc. (ref. to the
overview of the remote control) there are some other useful func-
tions which will be explained in this part of the manual.
Programme Information
Every time you change channels you will receive programme in-
formation for a few seconds. (In the "User Preferences" menu
you can select how long this information will be shown.)
The information may include:
Current time.
Channel list.
Channel number and name.
Name of the current and next programme.
The start and total time of the current programme.
A bar, indicating the elapsed time of the current programme.
Recommended lowest age limit for watching the programme.
The start and total time of the next programme.
Programme information will only be available if it is included in
the transmission. Otherwise a "No information available" mes-
sage will be shown.
You may change channel lists with the
This symbol will be shown in the upper left corner of the screen
when a downloadable application ("Open TV") is included in a
channel transmission.
To close an application and return to watch TV, press the P+ or
P- button on the remote control.
Please refer to page 27 for more information.
GB 16
Current
time
buttons.
Channel
Information about
list
the current pro-
gramme
Information about
the next programme
Channel number
and name
Press the red button on
the remote control to
start downloading an
"Open TV" application
Age limit
information
Advertisement
Table of Contents
