JVC BD-X201M Instructions Manual page 27

No. Item
2
Title number / Chapter
number / Index number /
Counter
3
Date / Time
4
Remaining time
5
REC CONTROL panel
6
DISC STATUS /
Index display
Use TITLE/CHAPTER / INDEX from the DISPLAY MENU screen to indicate whether or
not this is to be displayed.
OFF : No information is displayed
TITLE+CHAPTER: Title no., chapter no. and elapsed time of a title (hr: min: sec) are
displayed.
INDEX+TITLE : Index no. and elapsed time of a title (hr: min: sec) are displayed.
* When the PLAYBACK & 232C TYPE item on the SYSTEM MENU (1/2) screen is set
to VTR, the elapsed time and index no. will represent the total time and total number
respectively as accumulated from Title 1.
Use TIME/DATE from the DISPLAY MENU screen to select the way in which the date
and time are displayed.
OFF : No information is displayed.
DATE : Only the date is displayed.
TIME : Only the time is displayed.
TIME+DATE : Both date and time are displayed.
● The date display style can be changed using DATE STYLE from the DISPLAY MENU
screen.
Recording mode : The date and time from the internal clock are displayed.
Playback mode : The date and time of disc recording are displayed.
Use REMAIN from the DISPLAY MENU screen to indicate whether or not this is to be
displayed.
Recording mode : The amount of video that can still be recorded on the current disc is
displayed (in minutes).
Playback mode : Not displayed
* Remaining time is to be used as a general guide, not as an exact figure.
Provided that a recordable disc has been inserted, this panel will be displayed whenever
REC CONTROL from the REMOTE menu screen is set to ON.
The REC CONTROL panel can be used to control recording operations. ( Page 43)
● This is displayed even when the DISPLAY item is set to OFF.
When a disc is inserted into the DVD recorder, one of the following disc status is displayed
on the monitor screen (Approximately 3 seconds)
DVD-R : The current disc is a non-finalized DVD-R.
DVD-RW : The current disc is a non-finalized DVD-RW.
DVD : The current disc is a finalized DVD-R or DVD-RW.
INVALID DISC : The current disc is neither DVD-R or DVD-RW.
(Displayed while being inserted.)
● The following will be displayed when index is recorded or erased. (3 seconds)
INDEX WRITE : Displayed when writing index. (This is not displayed if TITLE/
CHAPTER/INDEX item from the DISPLAY MENU screen is set to
INDEX+TITLE or LCD item is set to INDEX.)
INDEX ERASE : Displayed when erasing index.
This is not displayed if DISPLAY item from the DISPLAY MENU screen is set to OFF.
Description
( Page 63)
17