•
Carefully wash the milk frother and the steam nozzle in warm water.
•
Check that the two holes indicated by the arrows in Fig. 27 are not
clogged. If necessary, clean them using a needle or pin.
•
Replace the steam nozzle by inserting it and vigorously turning it
upwards into the steam spout.
•
Replace the milk frother by pushing it upwards and turning it anti-
clockwise.
10 CLEANING AND MAINTENANCE
•
Before performing any cleaning operations, the machine must have
cooled down and must be disconnected from the mains power supply.
•
Never immerse the machine in the water: it is an electrical appliance.
•
Do not use solvents or abrasive detergents to clean the coffee maker.
A soft damp cloth will suffice.
•
All the components of the machine must not be washed in the dishwa-
sher.
10.1 CLEANING THE COFFEE MAKER
•
Clean the grounds container (as described in chapter 5, note 7) whe-
never the
light comes on steady (chap. 12 - point3).
•
The water tank should be cleaned regularly.
•
The drip tray is fitted with a level indicator (red) showing the level of
water inside. When the indicator starts to become visible (a few milli-
metres under the drip tray), the drip tray must be emptied and clea-
ned.
•
Check that the holes in the coffee delivery spout are not blocked. To
clean them, scrape the dry coffee residues with a needle (Fig. 28).
Steam
Milk frother
nozzle
OPERATING INSTRUCTIONS
13
Fig.25
Fig.26
Fig.27
Fig.28
Need help?
Do you have a question about the MAGNIFICA and is the answer not in the manual?
Questions and answers
how to descale Magnifica Pronto Cappucino
не вставляется контейнер для гущи
The coffee grounds container may not fit in the DeLonghi Magnifica if it is too full, preventing proper placement. Additionally, if the micro switch inside the machine is jammed with coffee residue, the machine may not recognize that the container has been removed and replaced. Cleaning the container and ensuring the micro switch is not obstructed may resolve the issue.
This answer is automatically generated