Canon image runner 2545i Printer Manual page 40

NOTE
• Rotate+Collate and Rotate+Group are available for selection if the paper size is LTR,
LTRR, A4, A4R, B5, or B5R.
• If Rotate+Collate and Rotate+Group is selected, part of the print image may be cut off
when the image is rotated. You need to load the same size paper as the original in the
paper drawers in both landscape and portrait positions. If you do not, all the sheets will
be printed in the orientation that the loaded paper is in.
• Offset+Collate and Offset+Group are available for the following paper sizes:
LTR, LTRR, LGL, 11" × 17", A4, A4R, A3, B4, or B5.
• When you select Staple, you can select the stapling position.
• The Staple+Collate mode is available for selection if the paper size is LTR, LTRR, LGL,
11" × 17", A4, A4R, A3, B4, or B5.
• The maximum number of sheets that can be stapled is 30 for LTRR, LGL, 11" × 17",
A4R, A3, and B4, and 50 for LTR, A4, and B5. If the number of sheets is greater than
the limit, they will not be stapled.
• When you are stapling paper in landscape orientation, the image orientation and the
staple position may not match, as shown below.
[Corner (Upper-L)]
[Corner (Lower-L)]
[Double (Left)]
[Double (Top)]
[Corner (Upper-R)]
[Corner (Lower-R)]
[Double (Right)]
[Double (Bottom)]
Settings Menu
3
3-17