Combining the Binding and Margin Settings
The figures below illustrate how the Binding and Margin settings are combined. You
can set the paper orientation using the printer driver. (See Chapter 3, "Printing
Functions," in the Driver Software Guide.)
Auto Continue
Off, On
This setting enables you to automatically clear an error and continue printing when an error
occurs (Error skip).
If [Off] is selected, you must perform error skips from the touch panel display.
If [On] is selected, error skips are performed automatically.
NOTE
• Error skip only temporarily clears an error, so the data may not print correctly.
• This setting is valid even if multiple errors have occurred.
3-13
Settings Menu
3