Last Number Redial; Line Callback - NEC 900i Installation And User Manual

Last Number Redial

2. Wait about four seconds, your display will show "Conference
Call".
Last Number Redial
With Last Number Redial, you can easily call the last outside number you
dialed. Each time you place an outside call, the system saves the number you
dialed (up to 24 digits). You can redial the call whether it was answered, unan-
swered or busy. Redial uses the same line to dial out unless you select a differ-
ent line.
To place a call using Last Number Redial:
1. Press TALK.
2. Press **.

Line Callback

You can leave a Callback request for a busy outside line. The system rings you
when the outside line is available. You do not need to keep checking the line,
hoping to find it idle. To leave a Callback for an extension, see the Callback
feature.
To request a Callback for an outside line on a line key:
1. Press the illuminated line key.
2. Dial C.
3. Press TALK.
To request a Callback after dialing a code for an outside line:
1. Dial C and press TALK.
2-22
-Busy party hears two short beeps.
-You cannot Intrude on a Conference call.
-If you hear fast busy tone, you cannot Intrude.
-You and the other two parties are in Conference.
This feature is always available.
If you hear busy tone, press an idle line key. Your call dials
out automatically.
You hear busy tone.
Busy tone stops.
Use your phone for other calls while you wait for Callback
to ring you back.
You can use your phone for other calls while you wait for
Callback to ring you back.
Onyx VSi System