Table of Contents
Advertisement
26
SymVeo IP Camera
User Manual
Figure 17. WDR menu
Note:
Observe the results on the monitor screen for the best settings.
Adjusting the bias changes the dynamic range of the camera's
light meter. Reducing the limit value lowers the maximum dynamic
range of the camera. These values are best left at their defaults: 0
bias and 12 limit. If the internal parameters of the camera end up
differing from those set by the location setting due to adjusting the
default values, a location setting other than CUSTOM_WDR can
become CUSTOM_WDR.
Move to the PREVIOUS PAGE option and press to leave the
current menu.
PTZ
The camera provides a digital PTZ (pan/tilt/zoom) of 1X - 4X. To
access the digital PTZ menu:
•
At the Main Menu, use the up and down buttons to move
to the PTZ option, then press the bottom selection button.
Advertisement
Table of Contents
