GE SymVeo SV-XP1 User Manual page 24

18 SymVeo IP Camera
User Manual
Figure 11. Camera ID Menu
2. Move to the ID DISPLAY option and toggle between the
OFF and ON options. Leave the desired option displayed.
ON displays the camera ID on the monitor screen.
3. Move to the CAMERA ID option and press the bottom
selection button to access the 12-character label. Use the
OSD buttons to scroll through the alphanumeric
characters for the first and following positions of the
label. Press the bottom selection button to save each
character and move to the next character position.
Note: Note: You can hold the
scrolling. To change a character that is already saved,
leave and reenter the CAMERA ID option, press the
bottom selection button for all leading characters that
you wish to remain as they are, and when you have
highlighted the character to be hanged, make the
change, save it, and finish saving the remaining
characters in the camera title.
and buttons for continuous