Using the alarms
Siesta Mi has two alarms. The alarms switch the radio on (if in
standby) and tune to a digital or FM radio station or sound a tone.
DR
AL1 ON
DR
1215
:
DR
1215
:
:
DR
DAILY
DR
DIGITAL
DR
LAST USE
DR
VOL
11
1
DR
SAVED
Setting a radio alarm
1. Press the
2. Scroll < > to 'On' and press Select.
3. Scroll < > to set the hour for the alarm
and press Select.
4. Scroll < > to set the minute for the alarm
and press Select.
5. Scroll < > to specify one of the following
alarm frequency options: 'Daily', 'Once',
'Weekends' and 'Weekdays' and press
Select to confirm.
6. Scroll < > to specify 'FM' or 'Digital' and
press Select to confirm.
7. Scroll < > to specify which station should
be played when the alarm goes off. You
have the option of selecting one of your
preset stations or you can select 'Last
Used' to select the station that you were
last listening to. Press Select to confirm.
8. Use Vol + and Vol - to set the volume the
radio will play at when the alarm sounds
and press Select to confirm.
9. One of the alarm icons will appear on the
display to show that an alarm is set.
2 button.
1 or
7
Need help?
Do you have a question about the SIESTA MI and is the answer not in the manual?
Questions and answers
Is there a way to increase the display (its so dark can barely see it in darkness)
To increase the display brightness on the Pure Siesta Mi clock radio, press the "Display" button and use the "+" button to increase the brightness level. The display will automatically adjust to the selected brightness.
This answer is automatically generated
@Mr. Anderson