4. Troubleshooting
Before requesting service, perform following checks.
Waiting
If the trouble has not been corrected, please contact a local dealer or the nearest customer service centre.
Be sure to inform them of the details of malfunctions and unit model number.
Do not attempt to repair the unit yourself. Always consult an authorized service provider
0
Symptom
Indoor unit does not give cool
air immediately when unit
starts.
Unusual odor blowing from
outlet when unit is started.
Sound of water flow during
operation.
Formation of mist while
cooling.
Creaking noise during start or
stop.
Unit does not operate.
Decreased cooling efficiency.
Remote control does not work
correctly.
Remedy
Compressor restarts after approximately
three minutes to protect itself. On
compressor restarting units starts to give
cool air again
Open the door or window for minutes
and run the AC in Fan mode to allow fresh
air inside the room. This helps to remove
odors from
the
room.
This is caused by refrigerant flowing inside
the unit.
Room air is cooled quickly by cold air flow
which looks like fog.
Deformation of plastic because of
temperature change.
Check electrical system connections, cords
and fuses.
Check if power supply is within 10% of
rated supply.
Check 'set temperature' .
Check for obstructions in air inlet and
outlet.
Check air filters for dirt.
Check indoor fan speed.
Check any other openings in the room.
Check effective distance to indoor unit.
Check low battery error indication on
remote display.
486678
Contents
Need help?
Do you have a question about the SPLIT AC and is the answer not in the manual?
Questions and answers