Important Safety Information; Safety Precautions; Proper Installation - GE 215C1044P010-3 Owner's Manual And Installation

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.
WARNING!

SAFETY PRECAUTIONS

I Check with your local public works department for
plumbing codes. You must follow these guidelines as you
install the Water Filtration system.
I Use the Water Filtration system on a potable, safe-to-drink,
home COLD water supply only. The filter cartridges will not
purify the water, or make it safe to drink.
I Do not use on a hot water supply (100°F. max.).

PROPER INSTALLATION

This Water Filtration system must be properly installed and located in accordance with the Installation Instructions
before it is used.
I Install or store where it will not be exposed to temperatures
below freezing or exposed to any type of weather. Water
freezing in the system will damage it. Do not attempt to treat
water over 100°F.
WARNING:
Discard all unused and packaging
material after installation. Small parts remaining after
installation could be a choke hazard.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
2
For your safety, the information in this manual must be followed to minimize the risk of
property damage or personal injury.
WARNING:
Do not use with water that is
microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system. Systems
certified for cyst reduction may be used on disinfected
water that may contain filterable cysts.
I Your Water Filtration system will withstand up to 125 pounds
per square inch (psi) water pressure. If your house water
supply pressure is higher than 100 psi, install a pressure
reducing valve before installing the Water Filtration system.