Panasonic AK-HRP200G Operating Instructions Manual page 5

Setup.mode.
(continued)
„ Opening.setup.mode
„
Setup mode differs from normal operating modes. Use the steps below
to open setup mode.
1..
When.a.camera.and.CCU.are.connected,.select.IRIS.(to.
light.the.<IRIS>.display.on.the.panel).
If the IRIS display is not lit, press the selected <DISPLAY SELECT>
button to select IRIS.
UP
ND CC
M.GAIN
DATA
SET
IRIS
DOWN
DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
SAVE/LOAD EXIT
UP+DOWN
IRIS display
Use the steps below to open setup mode when the power is on, but a
camera or CCU is not connected.
2..
Simultaneously.hold.down.DATA.SET.<DATA.SET>.
<UP>,.<DOWN>.and.<SHIFT>.for.approximately.two.
seconds.
This opens setup mode and Menu No. 1 (camera number setting) is
displayed.
SCENE/USER FILE
SHIFT SCENE 1 SCENE 2
USER 1 USER 2
UP
ND CC
M.GAIN
DATA
SET
IRIS
DOWN DISPLAY SELECT
ND/CC M.GAIN/M.PED SHUTTER
SET UP
SHIFT
+
SAVE/LOAD EXIT
UP+DOWN
CAMERA
SHT SYNC
M.PED 10-19
No.
SELECT
EXECUTE
SCENE 3 SCENE 4 STORE
USER 3
CAMERA
SHT SYNC
M.PED 10-19
No.
SELECT
EXECUTE
„ Exiting.setup.mode
„
To exit setup mode, hold down <EXIT> for two seconds. The unit returns
to normal operating mode.
UP
ND CC
M.GAIN
DATA
SET
IRIS
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
UP+DOWN SAVE/LOAD EXIT
„ Basic.operations
„
The buttons indicated in the figure below are available in setup mode.
No other buttons are available. All other LEDs stay off. (Except the
alarm display)
UP
ND CC
M.GAIN
DATA
SET
IRIS
DOWN
DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
SAVE/LOAD EXIT
UP+DOWN
1..
Selects.set.values
2..
Indicates.selected.submenu
3..
Indicates.set.values.and.selected.values
4.. Indicates.menu.numbers
5..
Selects.a.menu.number..Each.press.of.the.button.
increments.menu.numbers.
1→2→3→...→19→1→2→...
6..
Confirms.a.setting
7..
Selects.a.submenu..Each.press.of.the.button.opens.a.
different.submenu.
8..
To.exit.setup.mode,.hold.down.<EXIT>.for.two.seconds..
The.unit.returns.to.normal.operating.mode.
UP
ND CC
M.GAIN
DATA
SET
IRIS
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
SAVE/LOAD EXIT
UP+DOWN
SHT SYNC CAMERA
M.PED 10-19
No.
SELECT
EXECUTE
CAMERA
SHT SYNC
M.PED 10-19
No.
SELECT
EXECUTE
CAMERA
SHT SYNC
M.PED 10-19
No.
SELECT
EXECUTE
5