Renault Scenic Driver's Handbook Manual page 123

CRUISE CONTROL–SPEED LIMITER: limiter function
1
Switching on
Turn switch 1 on the side showing
Ì
.
The indicator light lights up in the in-
strument panel and the trip computer
enters speed limiter mode.
Limiting the speed
At a constant speed (above about
18 mph (30 km/h)) and in the correct gear
(for vehicles with manual gearboxes),
press switch 2: the speed is stored.
Driving
When a limit speed has been stored
and this speed is not reached, driving is
similar to driving a vehicle without the
speed limiter function.
From this point, no effort on the accel-
erator pedal will allow you to exceed
the programmed speed except in an
emergency (refer to information on
Exceeding the limit speed).
The system is designed in such a
way that it is possible to detect a dif-
ference between the stored speed
and the speed shown on the instru-
ment panel.
(continued)
2
5
Varying the limit speed
The limit speed may be changed by
pressing repeatedly or holding down:
– button 2 to increase speed,
– button 5 to reduce speed.
3
4
2.31