Input Channels; Additional Head Amp Setting Functions When Changing The Input Patching - Yamaha CL5 Supplementary Manual

Input channels

Additional head amp setting functions when
changing the input patching
When you change the input patching, you can now choose whether the HA (Head Amp) settings of the
port you patched will be used, or whether the HA settings of the channel will be copied to the port you
patched.
Make this selection in the PORT SELECT popup window and the PATCH/NAME popup window.
NOTE
You can also choose whether the HA settings from CL Editor will be used without change or
copied from the channel. For details, refer to the CL Editor Owner's Manual.
■ Settings in the PORT SELECT popup window
1.
In the OVERVIEW screen, press the GAIN/PATCH field to access the GAIN/PATCH
popup window.
2.
Press the PATCH button (or INPUT PORT button) to access the PORT SELECT popup
window.
3.
Press a button in the HA INFO field to specify whether the HA settings of the port
or the HA settings of the channel will take priority.
1
TAKE FROM PORT button
The HA settings of the port will take priority. Even if you change the patching, the HA settings of
the port will remain unchanged.
2
TAKE FROM CHANNEL button
The HA settings of the channel will take priority. The HA settings of the port that had been
previously patched will be copied to the newly-patched port.
A confirmation dialog box will appear when you switch buttons.
If an input without a HA is patched to the input channel, the dialog box is not shown.
5
Input channels
1 2
V1.7 Supplementary Manual