GE D-GES7600 Series Installation And Operation Instructions Manual page 88

General electric managed ethernet switches installation & operation instructions

Table of Contents

Manageable 8/9-Port Switch

SNMP

To view and/or change all SNMP-related information, click the Advanced Setup button, and

click SNMP in the selection menu. The SNMP Configurations window appears.

As shown below, the factory-default SNMP value is enabled and the factory-default

Community Name value is public.

Step 1: SNMP

For SNMP, specify whether it is Disabled or Enabled by clicking the drop-down list.

Step 2: Get Community Name

For Get Community Name, click in the text box and type a get community name.

Step 3: Set Community Name

For Set Community Name, click in the text box and type a set community name.

Step 4: Trap Community Name

For each Trap Community Name, click in the text box and type a trap community name.

Step 5: Trap Host IP Address

For each Trap Host IP Address, click in the text box and type a IP address for trap host 1~4.

Step 6: Cold Start Trap

For Cold Start Trap, specify whether it is Disabled or Enabled by clicking the drop-down list.

Step 7: Warm Start Trap

For Warm Start Trap, specify whether it is Disabled or Enabled by clicking the drop-down list.

Step 8: Link Down Trap

For Link Down Trap, specify whether it is Disabled or Enabled by clicking the drop-down list.

User's Manual

Table of Contents