Advertisement
Foot control
20. Back switch (BACK)
21. Play switch (PLAY)
P R EP A R A TI O NS
Connections
120VAC 60Hz
Loading a microcassette
1. Pull the EJECT lever to open the cassette compartment lid.
2. Load a microcassette
with the full reel to the right.
3. Close the lid by pressing it.
@o
NOTES:
- Be sure to close the lid after loading a micro-
cassette. The unit does not operate unless
the lid is closed.
- Do not atempt to operate the EJECT lever
while the unit is operating. When unloading
a microcassette, first press the STOP but-
ton and then pullthe EJECT lever to open
the lid.
Warning beep tones
The unit emits a warning tone in the following cases:
No cassette:
A tone sounds if there is no cassette in the unit when the unit is in the operating
mode.
End of taoe:
A tone sounds when the tape reaches the end in all operating modes.
Erase orotection:
A tone sounds if you attempt to erase a microcassette
whose erasure guard
tab has been broken.
#
-E3-
-E4-
Advertisement
