Advertisement
With the AC/DC adapter
This is designed for use at home or, wherever 100V~240V, 50/60Hz power supply is available.
1.) Insert the adapter into an appropriate
wall outlet, the specifications are
indicated on the adapter.
2.) Insert the plug of the AC/DC adapter
into the power socket of the device.
3.) Press the ON/OFF button to start the
aerosol therapy. The power indication
light (green) will be illuminated.
4.) Turn off the device by pressing the
ON/OFF button again after the
treatment is finished. The power
indication light (green) will be turned
off.
With the DC car adapter (option)
It is convenient to allow patient to take the treatments
1.) Make sure the cigarette lighter-socket in the car or DC source is 12VDC. Insert the plug of the
DC car adapter into the cigarette socket.
2.) Insert the other end of the adapter into the power socket of the device.
3.) Press the ON/OFF button to start the aerosol therapy. The power indication light (green) will be
illuminated.
4.) Turn off the device by pressing the ON/OFF button again after the treatment is finished. The
power indication light (green) will be turned off.
Warning:
DO NOT use while driving!!
With the rechargeable battery (option)
An optional rechargeable battery is also available for
providing two treatments of about 20 minutes each. This
device is designed for intermittent use. Turn off the unit
after 20 minutes of usage and allow unit to cool down
for 40 minutes before turning it on again.
1.) Inert the battery by matching the tenon on the top of
battery and rabbet at the device bottom. Slide the
battery pack for installation. A "click" sound will be
heard when the installation is done.
2.) Press the ON/OFF button to start the aerosol therapy.
when traveling by
7
car.
Advertisement
