Advertisement
Cleaning And Disinfecting
Cleaning the nebulizer kit
Following the cleaning instructions after each use will prevent any remaining medication in the
nebulizer kit from drying and causing the device to nebulize ineffectively.
-Cleaning after every use:
1. Press the ON/OFF button to power off
device. Unplug the AC/DC adapter from
the power socket of device.
2. Remove the mouthpiece (or mask adapter)
and nebulizer kit from the device.
3. Separate the parts of the nebulizer kit and
rinse all of them under running water.
Note: Never clean with benzene, thinner or flammable chemical products.
4. Especially
wash
cone and drug ampoule) with running water.
5.
You
may also rinse thoroughly the parts (excluding the main unit) under lukewarm running
water (max.60 degrees for 10 min.). Leave them
Warning: ․
․
-Disinfect Daily:
1. Using a clean container or bowl, soak items
one part white vinegar for 30 minutes.
2. With clean hands remove items from disinfectant solution, rinse under hot tap water, and air dry
on a clean paper towel.
the parts in contact with the drug (nebulizer cap, mouthpiece, micronization
DO NOT boil or autoclave the complete device or any
parts.
This portable nebulizer is not provided sterile nor is it
intended to be sterilized.
to air
dry.
(excluding main device)
9
in three parts hot water to
Advertisement
