Gen2 Operational Settings
The Gen2 Operational Settings window is used to configure the Gen2 tag operational parameters. Tap File - Gen2
Settings to display the Gen2 Operational Settings window.
Gen2 Operational Settings Window
Figure 5-6
Gen2 Operational Settings
Table 5-2
Setting
Parameter
Selection
Specifies the expected selected flag setting in the target tag population.
Ignore SL
SL not set
SL set
Session
Specify the session used in the communication with the target tag
population.
S0
S1
S2
S3
Target
Specify the expected inventoried flag setting in the target tag population.
A
B
Starting
Sets the number of slots in the first inventory round of the inventory
algorithm.
0 - 15
Exit
Tap File - Exit to exit the GeminiRFID Demo application.
Description
Ignore the selected flag.
Select tags without the selected flag set.
Select tags with the selected flag set.
Use session S0
Use session S1
Use session S2
Use session S3
Select tags with the inventoried flag set to A.
Select tags with the inventoried flag set to B.
Set the number of slots in the first inventory round of the
inventory algorithm from 1 to 15.
GeminiRFID Demo Application
5 - 9