Weight Of The Door/Drawer Fronts; Building Into A Peninsular Run; Building-In At The End Of A Run Of Units - Miele KF 1801 Vi Operating And Installation Manual

Installation
Stainless steel fronts
Stainless steel fronts and stainless steel
look plinth grilles are available from
your dealer or the Miele Spare Parts
Department.
Weight of the door/drawer
fronts
Before fitting the door/drawer fronts,
ensure that the weight of the fronts
does not exceed the maximum
permitted:
Appliance Max.
weight
of
refrigerator
door in kg
KF 1801 Vi, 47
KF 1811 Vi
KF 1901 Vi, 38
KF 1911 Vi
Fitting a front which is heavier than
the maximum permitted could
damage the hinges.
70

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
If one side of the appliance is visible, a
side panel is required.
The side panel must be fixed to the
wall, the floor and any furniture/units
above before the appliance is placed in
the niche.
Max.
The size of the side panel must match
weight
that of the furniture panel opposite.
of freezer
drawer
front in kg
10
14