Sharp AQUOS CD-BA250 Operation Manual page 15

Setup menu (Continued)
Clearing the password
Allow you to clear your password.
1
Repeat steps 1 to 3 in Setting a password.
2
Press a/b to select "Clear password", and then
press ENTER.
3
Press c/d to select "Yes", and then press
ENTER.
Parental rating
This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.
1
Repeat steps 1 to 3 in Setting a password.
2
Press a/b to select "Parental rating", and then
press ENTER.
3
Press a/b to select your desired rating, and then
press ENTER.
When the country setting is set to "Australia".
Selected item
NO BLOCK (–) Cancel the blocking.
General and Content is not offensive to most viewers.
above (G)
Parental Content is such that parents may
guidance and not want their children to view the
above (PG) programme.
Mature and Mature audience only. This programme
above (M) is specifically designed to be viewed by
adults and therefore may be unsuitable for
children under 15.
Mature adult Mature adult only. This programme is
and above specifically designed to be viewed by
(MA) adults and therefore may be unsuitable for
children under 15.
Adult Violence Not for children under age 15. Strong
and above (AV) elements of sex and/or violence.
Restricted and Not for children under age 18. Strong
above (R) elements of sex and/or violence.
BLOCK ALL Block all programmes.
When the country setting is set to "New Zealand".
Selected item
NO BLOCK Cancel the blocking.
General and Content is not offensive to most viewers.
above (G)
Parental Programme is suited to more mature
guidance viewers.
recommended
and above (PGR)
Adults only and Adults only. This programme contains
above (AO) material of an adult nature handled in
such a way that is unsuitable for children.
BLOCK ALL Block all programmes.
Description
Description
■ HDMI auto view (HDMI input mode only)
Selected item
Set whether or not to use the Auto
Selection of WIDE MODE based on
Enable/Disable
signal recognition received from the
HDMI signal.
■ Link operation
Using the HDMI CEC (Consumer Electronics Control)
protocol, with Link operation you can interactively
operate compatible system equipment (e.g. DVD), by
connecting the link operation-compatible devices with
HDMI-certified cables to the TV.
Link operation allows you to operate the HDMI-
connected equipment and the TV by using a single
remote control unit. (On, Off)
■ Audio return channel
If this function is set to "Auto", the TV can send audio
data for video content shown on the TV to a connected
audio device with just one ARC-compatible cable. Using
this function eliminates the need to use a separate digital
or analogue audio cable. (Auto, Off)
Connection for using "Audio return channel"
You need to use ARC-compatible cables/devices and
connect to the INPUT1 terminal to activate this function.
NOTE
• The ARC (Audio Return Channel) function works only when
using the INPUT 1 terminal.
• When you use an audio system compatible with the ARC
function of the TV, you do not need to connect an optical
audio cable to the TV.
■ Auto wide (DTV input mode only)
The "Auto wide" allows the TV to switch automatically
among the different picture size. (On, Off)
NOTE
• Use "Wide mode" if an image does not switch to the
appropriate picture size. When the broadcast signal contains
no aspect ratio information, the function will not work even if
enabled.
Description
13