Sleeping To Nature Sounds With Timer; Adjusting The Display Brightness; Stereo Headphone Jack - Timex T618 Operation Manual

Stereo cd clock radio with digital tuning and nature sounds

Hide thumbs Also See for T618:

Table of Contents

1. Press the

Sound Button twice to enter the sleep mode. This sets the sleep timer to the 90-minute

setting. The sleep timer setting remains active for approximately ten seconds before returning to the standard

display. The Sleep Indicator will be visible in the LCD display.

2. Continue pressing the

3. Press the

Reverse or

4. Press the

Sleep Volume Button to find a comfortable sleep volume level. The Sleep Volume Indicator

on the display shows the sleep volume level. Adjusting the sleep volume will not affect the alarm volume.

5. Press the

Off/Alarm Reset Button to turn off the nature sounds before the sleep time has elapsed.

Note: To see the number of minutes remaining on the sleep timer, press the

display will show the Sleep Time for approximately ten seconds before returning to the normal mode.

This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To select

a backlight setting, press the

Connect a pair of headphones (not included) to the Headphones Jack on the back of the unit for private

listening. The built-in speakers will not operate while the headphones are connected.

Important!

You must disconnect the headphones from the Headphones Jack before you go to sleep or you will not hear

any sounds emit from the built-in speakers at the wake time.

Sleeping to Nature Sounds with Timer

Sound Button to select a 90-, 60-, 30-, or 15-minute sleep timer.

Forward Button to choose from the four nature sounds.

Night-Light/Snooze Bar until the desired brightness is reached.

Sound Button once. The

Table of Contents

Show Quick Links

Table of Contents