Canon EOS 1Ds Mark III Instruction Manual page 144

wPrinting
e Adjustment of Printing Effects
Brightness
The image brightness can be adjusted.
Adjust levels
kBrightener
Effective in backlit conditions which can make the subject's face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show up on the
screen.
When [Detail set.] is selected, you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use <9>. B is for blue, A is amber, M is magenta, and G is
green. The color will shift in the respective direction.
When you select [Clear all], all the printing effect settings will be reverted
to the default.
144
In step 4 on page 142, select the printing
effect. When the <e> icon is displayed
next to <z>, press the <B>
button. You can then adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
When you select [Manual], you can
change the histogram's distribution and
adjust the image's brightness and contrast.
With the adjust levels screen displayed,
press the <B> button to change the
position of the <h>. Turn the <5> dial
to freely adjust the shadow level (0 - 127)
or highlight level (128 - 255).