Start Printing - Canon EOS 1Ds Mark III Instruction Manual

You can also print RAW and sRAW images taken by the camera.
With RAW+JPEG images, the RAW image will be printed. And with
sRAW+JPEG images, the JPEG image will be printed.
For details on trimming, see page 145.
The [Default] setting for printing effects and other options are the
printer's own default settings as set by the printer's manufacturer. See
the printer's instruction manual to find out what the [Default] settings are.
Depending on the image's file size and recording quality, it may take
some time for the printing to start after you select [Print].
If image tilt correction (p.145) has been applied, it will take longer to print
the image.
After the [Do not disconnect cable] message disappears, you can
disconnect the cable even during printing.
To stop the printing, press <0> while [Stop] is displayed, then select [OK].
Set the date and file number
5
imprinting.
Set as necessary.
Turn the <5> dial to select <
then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
Set the number of copies.
6
Set as necessary.
Turn the <5> dial to select <
then press <0>.
Turn the <5> dial to select the
number of copies, then press <0>.

Start printing.

7
Turn the <5> dial to select [Print],
then press <0>.
The printing will start.
wPrinting
>,
I
>,
R
143