1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Security Camera
  5. VDC-DP7585P
  6. Installation manual

Sanyo VDC-DP7585P Installation Manual

Color ccd camera
Hide thumbs Also See for VDC-DP7585P:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction Manual
INSTALLATION MANUAL
Color CCD Camera
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED
SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL
CODES.
Please read this manual before installing and using this unit, and always follow the instructions
in it for proper use. Please also read the separate INSTRUCTION MANUAL before using the unit
for proper use.
This unit can be installed on the ceiling or wall.
When installing, first remove the built-in camera
from the unit.
Ceiling Installed (see page 1)
(In-ceiling routing)
(Surface routing)
Wall Installed (see page 3)
(In-wall routing)
Since the conduit hole cover is not
waterproof-finished, always be sure to
seal the cover entirely by puttying, for
example, upon completion of installation.
(Surface routing)
VDC-DP7585P
Important
• Be careful when opening holes for installing
the unit. Work with the power and video
cables pulled out for easy installation.
• Make sure to properly perform waterproofing
for the ceiling or wall where you are installing
the unit.
• Make sure that the surface in the installation
location has no unevenness and is strong
enough to bear the total weight of the unit.
• Install this unit in an environment where the
temperature range stays between -10°C
and +50°C (no condensation allowed).
• As a precaution against static electricity
damage, touch a nearby metal object (door
knob, etc.) to dissipate static electricity in
your body before touching this unit.
b When routing the cables on ceiling or wall
surfaces:
Loosen the conduit hole cover fixing screw (A)
on the back of the camera unit base with the
hexagonal wrench (small), open the cover (B),
and pass the connection cables through the
conduit hole.
A
B

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VDC-DP7585P

Summary of Contents for Sanyo VDC-DP7585P

  • Page 1 INSTALLATION MANUAL Color CCD Camera THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED VDC-DP7585P SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES. Please read this manual before installing and using this unit, and always follow the instructions in it for proper use. Please also read the separate INSTRUCTION MANUAL before using the unit for proper use.

  • Page 2: Installing On The Ceiling

    Installing on the Ceiling 1. Remove the camera unit 2. Install the camera unit base Loosen the four screws (A) using the Attach the cushioning sheet (E) to the hexagonal wrench (large) and open the back of the camera unit base (F), open a dome cover.

  • Page 3: Mount The Camera Unit

    3. Mount the camera unit 4. Adjust/Check the video image from the camera Connect the cables from the ceiling. b Set up the camera remotely (see page 7). Push the excess of connected cables into the ceiling. b Check the settings screen or camera For details on the connections, see page 5.

  • Page 4: Installing On The Wall

    Installing on the Wall Installing on the Ceiling 5. Install the dome cover 1. Remove the camera unit Align the logo on the dome cover with See “Installing on the Ceiling” (see page 1). the mark (L) on either side of the camera unit base so that the lens is close to the 2.
  • Page 5 3. Mount the camera unit 4. Adjust/Check the video image from the camera Connect the cables from the wall. b Set up the camera remotely (see page 7). Push the excess of connected cables into the wall. For details on the connections, see page 5. b Check the settings screen or camera angle on a portable monitor (see page 7).

  • Page 6: Monitor Connection

    Connections Do not connect the power cord until all other connections have been completed. DC12 AC24 – BLACK WHITE YELLOW DAY/NIGHT PURPLE ALARM IN ORANGE TELE BLUE WIDE COMMON GRAY BNC type RG-6U, 300 m max. To prevent electromagnetic interference Monitor Connection •...
  • Page 7 All connection cables should be 24 AWG or higher with a maximum length of no more than 600 m. Color or Black-and-White Setting The video image can be fixed to be color or Alarm Signal Input black-and-white using an external switch. For details, see “Adjusting DAY/NIGHT For details, see “Specifying Alarm Input”...

  • Page 8: Adjusting The Camera

    Adjusting the Camera bSetting up the camera remotely Use of the separately ordered Camera Control Unit (VAC-70) is recommended for setting and adjustment of this camera. Advanced settings are possible from the main menu. For details, see the instruction manual for the Camera Control Unit.

Table of Contents