Making The Paper Source Setting; Making The Borderless Setting - Epson Stylus Pro 4400 Reference Manual

Making the Paper Source setting

You can select Paper Tray, Roll Paper, Roll Paper (Banner), or
Manual Feed from the Paper Source setting. Select one that
matches the paper loaded in the printer.

Making the Borderless setting

You can print your data without margins on paper.
For this printing mode, Epson recommends the following media
conditions.
Accommodate media width:
❏ 8 inch, 203.2 mm
❏ 210 mm (A4)
❏ Letter (8.5 in), 215.9 mm
❏ 10 inch, 254 mm
❏ 257 mm
❏ 297 mm (A3)
❏ 300 mm
❏ 12 inch, 304.8 mm
❏ 329 mm (Super A3/B)
❏ 13 inch, 330.2 mm
❏ 14 inch, 355.6 mm
❏ 400 mm
❏ 16 inch, 406.4 mm
❏ 420 mm (A2)
❏ 17 inch, 431.8 mm
Note:
❏ You cannot perform borderless printing on cut-sheet media with a
width of 420 mm (A2).
❏ When printing on roll paper with a width of 8 inches or 420 mm
(A2), attach a spacer to the spindle. See "Attaching the spacer to the
spindle" on page 267.
48
Printing with Windows