Making The Printable Area Settings - Epson Stylus Pro 4400 Reference Manual

Making the Printable Area settings

This setting is available when you select Paper Tray or Manual
Feed as the Paper Source setting. You can make the following
settings.
Standard
Select this setting to use the standard printable area.
Maximum
Select this setting to increase the printable area at the bottom edge.
Note:
❏ This setting is available only when Plain Paper, Plain Paper (line
drawing), or Tracing Paper is selected as the Media Type setting.
❏ The print quality may decline at the edges of printouts when this
setting is selected. Before printing large jobs using this setting, print
a single sheet to check the quality. When this setting is selected, make
sure that paper loaded in the paper tray is not curled.
Centered
Select this setting to center printouts.
154
Printing with Mac OS 9.x