Connect To The Power Source
The display should be installed close to an easily accessible power outlet�
Fully insert the prongs into the power outlet socket� A loose connection may
cause image degradation�
If there is power to the display, the front LED at the bottom of the display will
be either none or red� A red LED means the display is in standby mode�
Power On/Off Your New LCD Display
Press the power button on the remote control or press the power button
located on the side of the display� The display will power on�
Power button
Power Mode Status
Mode
On
LED Status
None
Warming up mode can automatically turn the display power on when signal
appears�
Press the power button on remote control or on side keypad can power on the
display in standby mode
or
Standby
Warming up
Red
Blinking Red
English-15