Using Cable Clamper; Preparing Your Lcd Display For Wall Mounting (Optional) - NEC E654 User Manual

Using Cable Clamper

Tie the cables together using the cable clamper�
Preparing Your LCD Display For Wall Mounting
(optional)
We suggest that you keep your display at least 2�36 inches (60 mm) from the
wall to prevent cable interference� Before mounting your display on the wall,
you need to remove the base� For your safety, only mount with a UL listed wall
mount bracket that supports the weight of the display� (Please see page 30�)
To attach a wall mount bracket to your display:
E654
1� Loosen the screws at the bottom of the base to remove the base�
2� Loosen the screws at the bottom of the stand to remove the stand�
3� Secure the wall mount bracket to the back of your display using four M6
screws�
screen size (inches)
65
CAUTION:
If you skip the step 1 and loosen the screws for stand directly, please be sure to hold the
base tightly to avoid dropping the base�
VESA Hole
required pitch (mm)
400 x 400
English-12
Neck Screw
VESA Hole depth
4 x M6 (30 mm)