External Speaker - Kenwood 762G Service Manual

2. Fold the flat cable ( 1 ) in the opposite direction (
3. Rotate the control section (
4. Insert the flat cable into the control section connector,
CN501 ( 5 ).
5. Mount the control section on the transceiver (
2
6
CN501
3
4
Fig. 7
6. Rotate the control panel 180 degrees and mount it on the
transceiver. Refit the two halves of the case to complete
installation. (Fig. 8)
Fig. 8
INSTALLATION
).
2
) 180 degrees ( ).
3 4
).
6
1
5
TK-760G/762G

6. External Speaker

6-1. KES-3 : Option
The KES-3 is an external speaker for the 3.5-mm-diam-
eter speaker jack.
• Connection procedure
1. Connect the KES-3 to the 3.5-mm-diameter speaker jack
on the rear of the transceiver.
Fig. 9
6-2. KES-4 : Option
The KES-4 is an external speaker used with the acces-
sory connection cable.
• Connection procedure
1. Install the KCT-19 in the transceiver. (See the KCT-19
section.)
2. Insert the crimp terminal into the square plug supplied
with the KCT-19.
3. Connect CN8 of the transceiver to connector C of the
KCT-19 instead of to the internal speaker connector.
1
3
13
6
15
12
Black lead
Crimp terminal
Black/White lead
(E23-0613-05)
Fig. 10
KES-3
KES-4
23