Getting Started - Kenwood KDC-X597 Instruction Manual

GETTING STARTED
4
When you turn on the power (or after you reset the unit), the display
shows: //CANCEL DEMO'' .. //PRESS// .. 'VOLUME KNOB//
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
//DEMO OFF// appears.
1
Press the volume knob to enter [FUNOION).
2
Turn the volume knob to select [SETTINGS], then press the knob.
3
Turn the volume knob to select [CLOCK], then press the knob.
4
Turn the volume knob to select [CLOCK ADJUST]/ [CLOCK ADJ], then
press the knob.
5
Turn the volume knob to adjust the hour, then press the knob.
6
Turn the volume knob to adjust the minute, then press the knob.
Press~ I~ to move between the hour and minute adjustment.
7
Press and hold
~
to exit.
(or)
------------------------------------------~
Press and hold SCRL DISP to enter clock adjustment mode
directly while in clock display screen.
Then, perform steps 5 and 6 above to set the clock.
1 Press t!> SRC to enter [STANDBY).
2 Press the volume knob to enter [FUNOION).
3
Turn the volume knob to select [INITIAL SET), then press the knob.
4
Turn the volume knob to make a selection (see the following table), then
press the knob.
5
Press and
hold~
to exit.
• To return to the previous hierarchy,
press~.
PRESET TYPE
KEY BEEP
PANDORASRC
BUILT -IN AUX/
BUILTIN AUX
CD READ
SWITCH PRE
SP SELECT
Default: XX
NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ AM).; MIX: Memorizes one station or SiriusXM channel for each preset
button regardless of the selected band or SiriusXM channel.
ON: Activates the keypress tone. ; OFF: Deactivates.
13•Iti!Jett4t
•~olii:Jie1e1e11J:
ON: Enables PANDORA in source selection.; OFF:
Disables.(~
8)
ON: Enables AUXin source selection.; OFF: Disables.(~ 7)
1:
Automatically distinguishes between audio file disc and music CD.; 2: Forces to play
as a music CD. No sound can be heard if an audio file disc is played.
l:i•M:iite1e11l:
REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the
line out terminals on the rear (through an external amplifier).
OFF/ 5/4/ 6 x 9/6/ OEM: Selects according to the speaker size (5 inches or
4 inches, 6x9 inches or 6 inches) or OEM speakers for optimum performance.
F/W UP
xx.xx
YES: Starts upgrading the firmware.; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/