Yamaha WR250X Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
operation.
Resetting the distance-compensa-
tion tripmeter or the distance-com-
1
pensation tripmeter in combination
with the stopwatch
2
TIP
Resetting can be made only to the dis-
3
tance-compensation tripmeter or to the
distance-compensation
combination with the stopwatch.
4
Resetting the distance-compensation
5
tripmeter
1. Check that the stopwatch mea-
6
surement is in operation.
2. Reset the distance-compensation
7
tripmeter to zero by pushing the
"RESET" button for at least two
seconds.
8
9
Resetting the distance-compensation
tripmeter in combination with the stop-
watch
1. Stop the stopwatch.
2. Reset the distance-compensation
tripmeter and the stopwatch to
zero by pushing the "RESET" but-
ton for at least two seconds.
Self-diagnosis device
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
tripmeter in
will come on and the display will indi-
cate an error code.
If the display indicates any error codes,
note the code number, and then have a
Yamaha dealer check the vehicle.
1. Error code display
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
3-8
1
ECA11590