Setting And Editing Vocal Harmony Types; Setting Up The Vocal Harmony Control; Parameters - Yamaha Tyros5 Reference Manual

Setting and Editing Vocal Harmony Types

Setting up the Vocal Harmony Control Parameters
You can set which part controls the Vocal Harmony regardless of the current Vocal Harmony Type.
1
Press the [VH TYPE SELECT] button to call up the Vocal Har-
mony Type Selection display.
2
Press the [8 ] (SETUP) button to call up the Setup display, then set the value by using
the [2 ]–[5 ] and [7 ] buttons.
For information on each parameter, see
3
After you finish setting the value, press the [EXIT] button to close the Setup display.
NEXT PAGE
104 Tyros5 Reference Manual
page 105.
NOTE
Check that the microphone is properly
connected (Owner's Manual, chapter 8)
and the settings (Reference Manual,
page 101) are adjusted correctly before
setting the Vocal Harmony Control
parameters here.