Page 1
Edge ® Owner’s Manual October 2013 190-01510-00_0D Printed in Taiwan...
Page 2
Garmin ® , the Garmin logo, Auto Lap ® , Auto Pause ® , City Navigator ® , Edge ® , and Virtual Partner ® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.
Heart Rate Monitor Battery ............13 Viewing Data Totals .............. 7 Replacing the Heart Rate Monitor Battery ......13 Sending Your Ride to Garmin Connect ........7 Replacing the GSC 10 Battery ..........14 Garmin Connect ..............8 Troubleshooting............14 Connected Features ..............
Page 4
Locking the Touchscreen ............14 Unlocking the Touchscreen ..........14 Getting More Information ............14 Temperature Readings ............14 Viewing Device Information ............. 14 Updating the Software ............. 14 Appendix...............14 Registering Your Device ............14 Data Fields ................15 Heart Rate Zone Calculations ..........16 Wheel Size and Circumference ..........
This device contains a lithium-ion battery. See the Important Replace the screw. Safety and Product Information guide in the product box for NOTE: Garmin ® recommends a torque specification of 7 lbf- product warnings and other important information. in. (0.8 N-m). Check the tightness of the screw periodically.
Align the tabs on the back of the Edge with the bike mount Using the Touchscreen notches • When the timer is running, tap the screen to view the timer overlay. The timer overlay allows you to use the settings and search features during a ride.
You can schedule workouts using Garmin Connect. You can plan workouts in advance and store them on your device. Following a Workout From the Web Before you can download a workout from Garmin Connect, you must have a Garmin Connect account (page Connect the device to your computer.
Following an existing ride from Garmin Connect: You can Select to save the step. send a course from Garmin Connect to your device. Once it Starting a Workout is saved to your device, you can follow the course or race against the course.
120%. You will race against the Virtual Partner to finish a 30-minute course in 24 minutes. Stopping a Course Tap the screen to view the timer overlay. The Garmin logos (on the module and the strap) should be right-side up. Select > Courses > Stop Course.
When everything is aligned and working correctly, tighten the cable ties, the sensor arm, and the spoke magnet. Garmin recommends that the torque is 1.9 to 2.4 lbf-in. (0.21 to 0.27 N-m) to ensure a water tight seal on the GSC 10 sensor arm.
You can manually adjust your zones on Step off the scale when indicated. the device or using Garmin Connect. If you know your functional threshold power (FTP) value, you can enter it and allow the TIP: If an error occurs, step off the scale. Step on when software to calculate your power zones automatically.
Store your activities: After you complete and save an activity Data Recording with your device, you can upload that activity to Garmin Connect and keep it as long as you want. The device uses smart recording. It records key points where you change direction, speed, or heart rate.
Select Edit > Copy. • Select Addresses (requires routable maps) to navigate to Open the Garmin or memory card drive or volume. a specific address. Select Edit > Paste. • Select Intersections to navigate to the intersection of two The file appears in the list of files in the device memory or on streets.
Select a map. Select > Activity Profiles. Select Select a profile. Go to http://buy.garmin.com, or contact your Garmin dealer. Select Navigation > Map > Orientation. Finding an Address Select an option: You can use optional City Navigator ® maps to search for •...
Customizing Your Device • Select Auto Lap to set how laps are triggered (page 12). • Select Auto Scroll to customize the display of the training Profiles data pages when the timer is running (page 12). The Edge has several ways for you to customize the device •...
The satellite page shows your current GPS satellite information. If necessary, customize the lap data fields (page 11). For more information about GPS, go to www.garmin.com /aboutGPS. Marking Laps by Distance From the home screen, select > System > GPS > View You can use Auto Lap to automatically mark the lap at a specific Satellites.
• To prolong the life of your heart rate monitor, unsnap the NOTE: Use Ethylene Propylene Diene module when not in use. Monomer (EPDM) replacement bands only. Go to http://buy.garmin.com, or contact your Heart Rate Monitor Battery Garmin dealer. WARNING About IPX7 Do not use a sharp object to remove user-replaceable batteries.
Insert the new battery with the positive side facing up. Getting More Information NOTE: Do not damage or lose the O-ring gasket. You can find more information about this product on the Garmin Use a coin to twist the cover clockwise back into place (the website.
Speed Zone: The current range of speed (1 to 10). Zones can be set in Garmin Connect. HR - %Max.: The percentage of maximum heart rate. Sunrise: The time of sunrise based on your GPS position.
SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS 12 × 1.75 AGREEMENT CAREFULLY. 14 × 1.5 1020 Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the 14 × 1.75 1055 Appendix...
Page 21
“Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third- party providers. You acknowledge that the Software is the property of Garmin...
Need help?
Do you have a question about the Edge 810 and is the answer not in the manual?
Questions and answers