Table of Contents
Advertisement
Reset
To restore the GE/Skype phone back to factory settings you can
reset the phone and base. Please note, though, that all your
personal settings will be lost.
1. From the idle screen, press
. Press
and
. Press
and
. Press
and
Changing the Battery
CAUTION: To reduce the risk of fire or
personal injury, use only the Thomson Inc.
approved model BYD NiMH H-AAA 900mAh
1.2V, rechargeable Nickel-metal Hydride AAA
batteries, which is compatible with this unit.
1. Make sure handset is OFF (not in TALK mode) before you replace
battery.
. Remove the battery compartment door.
. Remove the batteries from the handset.
. Insert the new batteries.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge.
Allow the handset battery to properly charge (for 16 hours)
prior to first use or when you install a new battery pack. If
you do not properly charge the phone, battery performance
will be compromised.
Battery Safety Precautions
• Do not burn, disassemble, mutilate, or puncture. Batteries of
this type could release toxic materials which can cause injury.
• To reduce the risk of fire or personal injury, use only the
Nickel-metal Hydride battery listed in the User's Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 0 days.
NOTE: The RBRC seal on the battery used in your Thomson Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.
to enter the main menu.
to select Settings.
to select Advanced.
to select Reset.
6
Advertisement
Table of Contents
