Changing The Pin Code - Yamaha DRX-2 Owner's Manual

Access control Enter code . . .
Auto resume On
Access control Enter code . . .
Auto resume On
Access control (Child Lock)
Changing the country
The set filter values depend on the respective country. It is therefore necessary to
enter the country to which these filter values apply.
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU. The menu bar appears
4
Select the "
5
Select line "
6
Confirm the line "Access control" using u.
7
Enter your four-digit code. If the code is new, you may have to enter the code a
n
second time as confirmation.
Disc features
8
Select "Change country" using w or v and confirm with u.
9
Select the corresponding country using v or w and confirm with ENTER/OK.
0
To end, press t and then SYSTEM-MENU.

Changing the PIN code

1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU. The menu bar appears
4
Select the "
5
Select "
6
Confirm "Access control" using u.
7
Enter your four-digit PIN code. If the code is new, you may have to enter the code
n
a second time as confirmation.
Disc features
8
Select "Change code" using v or w and confirm with u.
9
Enter the new code using the number buttons 0..9. Enter the same code again as
confirmation.
0
Quit using t and SYSTEM-MENU.
I have forgotten my code
Press STOP
now switched off. You can now enter a new code as described above.
" icon using t or u.
(Disc features)" using w or v and confirm with u.
" icon using t or u.
(Disc features)" using w or v and confirm with u.
Tip
four times (step 7), then press ENTER/OK. Access control is
68