Table of Contents
Advertisement
Timer
Timer programming
VPS
Date Prog. Start PDC End
01
BBC1 20:15
Mo-Fr/Weekly
Press SELECT
59
Switching on "VPS/PDC" in the "Start" input field
Select the "Start" input field using u. Using SELECT switch on "VPS/PDC" ("*"
lights up). If you press SELECT again, you will switch "VPS/PDC" off ("*" goes
out).
Changing the recording mode in input field "End"
Select the "End" input field using u.
Use SELECT to select the recording mode "M1, M2, M2x, M3, M4, M6, FR".
7
If all information is correct, press the ENTER/OK button. The programming
information is stored in a TIMER block.
8
To end, press TIMER.
9
Insert a recordable disc (one without write protection).
The disc you have inserted will be checked.
0
Switch the DVD recorder off with B/I.
The programmed recording will only function properly if the DVD recorder has
been switched off using the B/I button.
If any of the TIMER blocks are in use, "TIMER" will light up on the recorder display.
Programming recordings without
the S
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Press TIMER on the remote control.
The programming method selected last is marked.
3
Select line "Timer programming" with w or v. and confirm with the u button.
The information will appear on the screen.
Rec
4
Select the input field with t or u.
Mode
21:30 M1
5
Enter information with w or v or with the number buttons 0..9.
Selecting daily/weekly recordings
To store
In "Date" use SELECT to select from the following options:
Press OK
"Mo-Fr": Repeated daily recordings from Monday to Friday
"Mon": Repeated weekly recordings (every week on the same day, e.g. Mon-
day).
Programme numbers of the "EXT1" and "EXT2"scart socket
You can also programme recordings from external sources via scart socket EXT 1
TO TV-I/O ("EXT1") or EXT 2 AUX-I/O ("EXT2").
Switching on "VPS/PDC" in the "Start" input field
Select the "Start" input field using TIMER. Using SELECT switch on "VPS/PDC"
("*" lights up). If you press SELECT again, you will switch "VPS/PDC" off ("*" goes
out).
Changing the recording quality in input field "End"
Select the "End" input field using u.
Use SELECT to select the recording mode.
6
If all information is correct, press the ENTER/OK button. The programming
information is stored in a TIMER block.
7
To end, press TIMER.
®
V
System
HOW
IEW
Programming a recording (TIMER)
Tip
Tip
Advertisement
Table of Contents
