Specifications - Panasonic GP-X SERIES Specifications

1029
High Speed High Accuracy Eddy Current Type Digital Displacement Sensor

SPECIFICATIONS

FIBER
SENSORS
LASER
Controllers
SENSORS
PHOTO-
ELECTRIC
SENSORS
Item Set model No.
MICRO
PHOTO-
ELECTRIC
Supply voltage
SENSORS
Current consumption
AREA
SENSORS
Resolution (Note 2)
LIGHT
CURTAINS
Sampling frequency
PRESSURE /
FLOW
Linearity (Note 2)
SENSORS
INDUCTIVE
Temperature characteristics (Note 3)
PROXIMITY
SENSORS
Analog voltage outputs
PARTICULAR
USE
Response time
SENSORS
SENSOR
OPTIONS
Comparative outputs
SIMPLE
WIRE-SAVING
(HI, GO, LO)
UNITS
WIRE-SAVING
SYSTEMS
Utilization category
MEASURE-
MENT
SENSORS
Output number
STATIC
CONTROL
DEVICES
Output operation
ENDOSCOPE
Short-circuit protection
LASER
MARKERS
PLC /
External input
TERMINALS
HUMAN
MACHINE
INTERFACES
Serial I/O
ENERGY
CONSUMPTION
VISUALIZATION Zero-set setting method
COMPONENTS
MODE
FA
COMPONENTS
HI
MACHINE
VISION
GO
SYSTEMS
UV
LO
CURING
SYSTEMS
TIMING
Upper level digital display part
Lower level digital display part
Selection
Guide
Pollution degree
Laser
Displacement
Ambient temperature
Magnetic
Displacement
Ambient humidity
Collimated
Beam
EMC
Digital Panel
Controller
Vibration resistance
Metal-sheet
Double-feed
Detection
Shock resistance
Material
GP-X
GP-A Weight
Accessory
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C
2) This value was obtained at a constant +25 °C
3) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and controller.
4) Adjusted to a 0 to +5 V factory setting.
Type NPN output
GP-XC□
GP-XC3SE / GP-XC5SE: 0.04 % F.S. (64 times average processing)
GP-XC8S / GP-XC10M / GP-XC12ML / GP-XC22KL: 0.02 % F.S. (64 times average processing)
Output voltage: –5 to +5 V (Note 4), Output impedance: 100 Ω approx.
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less
(between comparative output and 0 V)
• Residual voltage: 1.6 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current)
Photo-coupler input
• Input current: 9 mA or less
• Operating voltage: ON voltage 17 V or more (between +24 V and input)
OFF voltage 4 V or less (between +24 V and input)
• Input impedance: 5 kΩ approx.
5 digit orange LED (display of numerical values out of upper and lower limit value)
5 digit green LED (display of numerical values within the upper and lower limit value)
0 to +50 °C
10 to 55 Hz frequency, 0.75 mm
100 m/s
+77 °F.
GP-X
24 V DC ±10 % Ripple P-P 10 % or less
150 mA or less
40 kHz (25 μs)
Within ±0.3 % F.S.
0.07 % F.S./°C or less
75 μs (maximum speed)
PNP open-collector transistor
DC-12 or DC-13
HI / GO / LO 3 value output
HI : ON when measured value > the upper limit value
GO: ON when upper limit value ≥ measured value ≥ lower limit value
LO : ON when lower limit value > measured value
Incorporated
Photo-coupler input
RS-232C
Push button setting / External input setting
Orange LED (lights up when in mode status)
Orange LED (lights up when the upper limit value is exceeded)
Green LED (lights up when within the upper and lower limit value)
Orange LED (lights up when less than the lower limit value)
Green LED (lights up as per the external or internal trigger timing)
3 (Industrial environment)
+32 to +122 °F (No dew condensation), Storage: 0 to +50 °C
35 to 85 % RH, Storage: 35 to 85 % RH
EN 61000-6-2, EN 61000-6-4
0.030 in amplitude in X, Y and Z directions for two hours each
acceleration (10 G approx.) in X, Y and Z directions for five times each
2
Enclosure: Polycarbonate
Net weight: 120 g approx.
ATA4811 (Controller mounting frame): 1 set
SERIES
PNP output
GP-XC□-P
• Maximum source current: 100 mA
• Applied voltage: 30 V DC or less
(between comparative output and +V)
• Residual voltage: 1.6 V or less (at 100 mA source current)
0.4 V or less (at 16 mA source current)
• Input current: 9 mA or less
• Operating voltage: ON voltage 17 V or more (between 0 V and input)
OFF voltage 4 V or less (between 0 V and input)
• Input impedance: 5 kΩ approx.
+32 to +122 °F
+68 °F.