Table 26 Error Register - Hitachi HDS723020BLA642 Specifications

8.8 Error Register
7
ICRCE

Table 26 Error Register

This register contains status from the last command executed by the device, or a diagnostic code.
At the completion of any command except Execute Device Diagnostic, the contents of this register are valid
always even if ERR=0 in the Status Register.
Following a power on, a reset, or completion of an Execute Device Diagnostic command, this register contains a
diagnostic code. See 0 on page 57 for the definition.
Bit Definitions
ICRCE (CRC) Interface CRC Error. ICRCE=1 indicates a CRC error occurred during FIS transmission or
FIS reception.
UNC
Uncorrectable Data Error. UNC=1 indicates an uncorrectable data error has been
encountered.
IDNF (IDN) ID Not Found. IDN=1 indicates the requested sector's ID field could not be found.
ABRT (ABT) Aborted Command. ABT=1 indicates the requested command has been aborted due to a
device status error or an invalid parameter in an output register.
TK0NF (T0N) Track 0 Not Found. T0N=1 indicates track 0 was not found during a Recalibrate command.
AMNF (AMN)
Address Mark Not Found. This product does not report this error. This bit is always zero.
Error Register
6 5 4
UNC 0 IDNF
Hitachi hard disk drive specifications
3 2
0 ABRT TK0NF
53
1 0
AMNF