Video; Tv Type; Tv Display; Video Output Format - Sanyo DVR-SD450 Operating Instructions Manual

Table of Contents

2.2 VIDEO

MULTI: Select this option if your TV supports both NTSC and PAL.

PAL: Select this option if your TV supports only PAL.

NTSC: Select this option if your TV supports only NTSC.

TV Display controls the presentation of the picture on the screen.

4:3 PS

4:3 LB

16:9WS

4:3 PS: (Normal/PS Pan & Scan)

Allows the movie to fill the entire screen of your TV, but not the right and left edges.

4:3 LB: (Normal/LB Letterbox (4x3))

Allows you to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will

occupy a smaller portion of the screen.

16:9 WS: (Widescreen (16x9))

Choose this setting if your DVD recorder is connected to a widescreen TV.

NOTE: Depending on the format of the DVD disc, e.g. 2.35:1 the picture may still have black lines above and

below the picture.

This menu item enables user to select video output as either "Progressive" or "Interlaced".

When progressive option is selected, a confirmation message will be displayed. If user does not press

any key to confirm, selection will be discarded after a while.

NOTE: You can only get progressive output with progressive TV set, otherwise you will not get video

properly.

NOTE: Video output Format is disabled and switched to progressive mode in menu when HDMI cable is

plugged.

If your selection and the TV set does not match please use the shortcuts below in monitor mode:

CLEAR, CLEAR, 5: Switch to progressive

CLEAR, CLEAR, 6: Switch to interlaced

Table of Contents

Show Quick Links

Table of Contents