Adding Toner - Olivetti d-Copia 45 Operation Manual

Section 3 PREPARATIONS

3. Adding toner

Add toner when "Add toner" is displayed. Although a few copies can
still be made once this message is displayed, you should add toner as
soon as possible.
* DO NOT add toner unless this message is displayed.
* Touch the "Adding toner" key to have the procedure for adding toner
displayed on the touch panel.
Inch specifications
Ready to copy.
Add toner.
11x8 1 / "
2
8 / x11"
1
2
APS
11x8 1 / " Bypass Auto
2
Exposure
11x8 1 / "
2
Exposure
Basic User choice Function
Metric specifications
Ready to copy.
Add toner.
Plain
APS
Color
Auto
Bypass
Exposure
Plain
Recycled Exposure
Basic User choice Function
CAUTION
DO NOT attempt to incinerate the toner bottle or the
waste toner box. Dangerous sparks may cause
burns.
CAUTION
DO NOT attempt to force open or destroy the toner
bottle or the waste toner box.
1 Open the cover on the right side of the operation panel.
3-8
Paper size Set
11x8 / "
1
2
Combine
Orig. image
quality
1 sided
AMS
R 1 sided
Reduce
1 sided /Enlarge
R 2 sided
Reduce 2 sided/
/Enlarge Separation
Adding
Program
toner
Paper Size
Set
Combine
Orig. quality
1 sided
AMS
R1 sided
Reduce
1 sided
/Enlarge
R2 sided
Reduce 2 sided/
/Enlarge Separation
Adding
Program
toner
2 Turn the new toner bottle upside down and tap the bottom
portion about 10 times or so.
3 Hold the bottle firmly and shake up the contents by turning it
upside down and then right-side up 10 or more times in the
manner shown in the illustration.
4 Next, hold the bottle horizontally and shake it back and forth
10 or more times.
5 Fit the hole in the toner bottle (located below the
metal pin (shown as 1 in the illustration) that is protruding
out of the toner supply slot.
) over the