Intrusion Zone Tab - GE v6 User Manual

Intrusion Zone Tab

Manual Control Form
This form allows you to manually control the Intrusion Zone, and takes the Intrusion Zone from one
condition (armed) to another condition (disarmed), depending on the current operator's permissions.
Example:
When the Zone is Armed, readers will not allow access to anyone, alarm points are
monitored, and schedules are ignored.
When the Zone is Disarmed, personnel require only access rights for readers.
Select micro
Immediately following selection of a micro, the system searches and displays Intrusion Zone records in
the list box windowpane, associated with the selected micro.
All displays all micros in the operator's facilities.
By Micro displays records for a specific micro. Click the down arrow to display the list of
micros.
Columns in Windowpane
Description: Description of the Intrusion Zone in the database.
Micro: Micro on which the Intrusion Zone Control is located.
Set State To:
Arm: Immediately arms the selected Intrusion Zone.
Disarm: Immediately disarms the manual Intrusion Zone.
Purpose
When you select an Intrusion record, this box is enabled. Enter an explanation for arming/disarming the
Intrusion Zone. This field accepts 255 alphanumeric characters. These comments are written to the
operator history file and display in the Purpose Field, on the Operator History Report.
Secure Perfect 6.1.1 User Manual
Reference Topic:
Intrusion Overview
190