GE v6 User Manual page 17

Enable 'Valid No Passage': This option is configured on the
checkbox if you want your Secure Perfect system to notify you when a valid badge read occurs but the
door did not open within the configured sense time. This may be an indication of a duress situation,
someone deciding not to pass through the door, or an accidental read as someone passes a reader.
This feature must be associated with an alarm type of door forced or door held in order to be notified
of a change in state of the door.
In order to notify of a duress situation,
New in 6.1:
Guard Tour:
This feature makes use of two new forms in Secure Perfect,
is an inspection of your facility premises, by a security guard. The officer stops at pre-determined tour
points along the way, where a digital input (DI) is triggered or a badge is presented to a reader so that the
Secure Perfect system can track the tour progress. Each time a badge is presented to a reader, a tour
point is 'hit.' DIs can also be assigned as tour points. An additional tab has been added to the
Control form. The Guard Tour tab
configured in your Secure Perfect system. Select a Guard Tour to display tour details and tour points. An
occasion may arise that requires a tour to be started, paused, resumed, or stopped manually. This
feature and related forms are not available for input if you are not licensed for Guard Tour.
Global Edition Enhancements:
Database Server and Fileserver Redundancy: Global Editions systems can be configured for
database redundancy, at the Region level. A Regional Database Server can be configured to have
backup servers. Refer to the Backup Regions tab of the Region Form. If a client is not able to connect
to its Regional Database Server for any reason, it fails over to the backup Regional Server.
Regional database redundancy and fileserver redundancy operate independently. One or the other, or
both can fail at the same time, whether they reside on the same server computer or are configured to
reside on separate computers.
Client Region Failover: If you have Region backups configured, all clients in that region, by default,
will fail over to the backup Region when the system detects that it cannot access the database. You
might choose to clear this checkbox on the Client tab of the Client form, to prevent nonessential client
failover and keep extra traffic on your system network to a minimum.
Alarms:
Alarm Bumping and Routing: The Client Group Form allow you to assign Secure Perfect computers
into logical Client Groups. Then,
all times. Additionally, alarms can be 'bumped' (forwarded) to one or more additional Client Groups
when alarms are unacknowledged and unpurged within configured time limits.
Alarm Graphics Enhancements: Alarm Graphics can now be configured for digital inputs and digital
outputs. The Alarm Graphics Viewer
enhanced functionality. Operators for the Alarm Graphics Viewer must be assigned 'Update' and
facility permissions in order to select right-click menu options. For shortcut menu functionality, rest
your mouse pointer on an assigned point and right-click. The shortcut menu that displays with a right-
click mouse button depends on the Point Type assigned to the point. The options allow manual control
of doors.
Duress: This selection determines whether the door will open when a duress PIN code (with the final
digit incremented by + 1) is entered with a valid badge. This feature is configured for your Secure
Perfect system on the
Event Trigger Updates:
Assigning Intrusion Zones to an Event Trigger: The
allows you to assign Intrusion Zones and Intrusion Zone transaction type(s) that will trigger an event.
Extended Unlock Time Options:
Extended unlock time is enabled on the
enabled badges associated with a
Extended times (in minutes and seconds) are configured and assigned on the
Reader Form. For example, if a door is used by disabled persons or the reader is mounted at a distance
from the door, a longer unlock time may be required to exit or enter.
Secure Perfect 6.1.1 User Manual
Grant Access on Duress
of the Manual Control form displays the status of Guard Tours
Alarms can be routed
displays active status. Right-click menu options display newly
Parameters Form, Settings
Personnel Tab
Person record allow extra time to gain access to an entry or exit point.
Reader Form, Reader
must be configured.
Guard Tours and Tour
to these Client Groups by time schedule or at
Tab.
Intrusion Zone tab on the Event Trigger form
of the Person Form. When this option is selected,
Door Functions tab of the
tab. Select this
Point. A Guard Tour
Manual
15