Basic Operations; Switching Power On/Off; Adjusting The Volume - Kenwood NEXEDGE NX-410 Instruction Manual

S P
WITCHING OWER
Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the Power switch/ Volume control counterclockwise fully
to switch the transceiver OFF.
■ Transceiver Password
If the transceiver is password protected, "PASSWORD" will
appear on the display when the power is turned ON. To
unlock the transceiver, enter the password:
1 Select a character using the DTMF keypad.
• Press
# to delete all characters.
2 Press
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
• The password can contain a maximum of 6 digits.
A
DJUSTING THE
Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.

BASIC OPERATIONS

ON/OFF
or # to delete a character. Press and hold
or to confirm the entry.
V
OLUME
or
9